Digi CM - Manual (Page 41)

Chapter 4 41
Configuring Ports
Introduction
This chapter provides information on configuring serial ports. Key port
configuration attributes include whether or not the port is enabled or disabled,
the host mode, which defines a type of communication between the port and a
remote host, the protocol, authentication, user access restrictions, and serial
communication attributes.
Enabling and Disabling the Ports
All serial ports may be enabled or disabled individually or as a group from the
web interface.
1. Click Serial port > Configuration > Port number or all
2. Select Enable or Disable from the drop down menu.
3. Click Save to flash and continue with other configurations or click Save & apply .
Chapter 4 C o n f i g u r i n g P o r t s