Authentication, Chapter 16 – Digi CM User Manual
Page 132
Authentication
132
Chapter 16
Field Descriptions for Sniff Sessions
Authentication
1. Access the configuration menu.
2. Choose Serial port configuration.
3. Choose an individual port number or 0 (zero) for all ports > Authentication.
4. Choose Authentication type.
Escape
Sequence
Ctrl+
Description of Action
Occurrence
m
take over main session (read/write)
only presented to users with
read/write access upon entering
a session
s
enter as a slave session (read only)
only presented to users with
read/write access upon entering
a session
b
send break
not functional for sniff users
l
show last 100 lines of log buffer
must enable logging for this
option
d
disconnect a sniff session
only functional to admin
a
send message to port user(s)
not available to sniff users
r
reboot device using power-switch
only if power management is
available on this port
p
power device on/off
(show only on or off) only if
power management is available
on this port
x
close current connection to port
closes the sniff session
connection