Flowserve MX-85 Actuator User Manual
Page 21
Advertising
Flow Control
Limitorque Actuation Systems
FCD LMAIM1341-00
MX-85/140 Maintenance and Spare Parts
13
3.2.2 Remounting (Type A1/A1E Base)—Actuator remounting separate from
thrust base
STEP 5
Thrust base remounting (if required)
Ensure the thrust base stem nut has the two lugs
positioned upward to engage with the drive sleeve
slots when actuator is reinstalled onto thrust base.
Thread thrust base back onto mounting adapter.
5
STEP 6
Secure thrust base to mounting adapter with
mounting bolts.
6
STEP 7
Actuator remounting
Lower the actuator onto the thrust base, making
sure thrust nut lugs align and properly engage with
drive sleeve slots.
7
Advertising
This manual is related to the following products: