Flowserve MX-85 Actuator - Manual (Page 3)

Flow Control
Limitorque Actuation Systems
FCD LMAIM1341-00 MX-85/140 Maintenance and Spare Parts i
Contents
1 Introduction 1
1.1 Premise 1
1.2 Important Notes & Warning Statements 1
1.3 Procedure Emphasis 2
1.4 Reference Documents 2
2 Accutronix MX
Actuator Subassembly 3
2.1 MX Actuator Subassembly Components 4
2.2 Product Information 4
2.2.1 Product Description 4
2.2.2 Storage 4
2.2.3 Unit Weights 5
2.3 Product Identification 5
2.3.1 Initial Inspection and Recording Suggestions 5
2.4 Maintenance 5
2.4.1 Recommended Maintenance 5
2.4.2 Unit Lubrication 6
2.4.3 O-rings and Lubrication 7
2.5 Subassembly Removal and Remounting Procedures 7
2.6 How to Order Replacement Subassemblies 7
2.6.1 Replacement Parts 7
2.6.2 Return Procedure 7
3 Remove Actuator
from Mounting Adapter 9
3.1 Actuator Removal with Type B1/B4/B4E Base (Torque) 9
3.1.1 Removal (Type B1/B4/B4E Base) 9
3.1.2 Remounting (Type B1/B4/B4E Base) 10
3.2 Actuator Removal with Type A1/A1E Base (Thrust) 11
3.2.1 Removal (Type A1/A1E Base)—
Actuator removal separate from thrust base 11
3.2.2 Remounting (Type A1/A1E Base)—
Actuator remounting separate from thrust base 13
3.2.3 Removal (Type A1/A1E Base)—
Actuator and thrust base as a unit 14
3.2.4 Remounting (Type A1/A1E Base)—
Actuator and thrust base as a unit 15