1 removal, 2 remounting – Flowserve MX-85 Actuator User Manual
Page 41
Advertising
Flow Control
Limitorque Actuation Systems
FCD LMAIM1341-00
MX-85/140 Maintenance and Spare Parts
33
4.4.1 Removal
First Remove
1. Remove actuator from mounting adapter.
STEP 1
a
WARNING: Potential to operate while danger-
ous mechanical parts are exposed during
subassembly removal. To prevent injury, turn
off all power sources to actuator before remov-
ing thrust base assembly. Power sources may
include: main power or control power.
Remove the four screws (#10-10) and pull the
thrust base assembly off the actuator.
1
4.4.2 Remounting
STEP 2
Secure the thrust base with the four screws
(#10-10).
2
Advertising
This manual is related to the following products: