Flowserve MX-85 Actuator - Manual (Page 83)

Flow Control
Limitorque Actuation Systems
FCD LMAIM1341-00 MX-85/140 Maintenance and Spare Parts 75
5.8.1 Removal
First Remove
1. Drain oil.
2. Remove ACP cover (subassembly #7). (See Section 5.1.)
3. Remove control module (subassembly #8). (See Section 5.2.1.)
4. Remove encoder (subassembly #6). (See Section 5.7.1.)
STEP 1
c WARNING: Hazardous Voltage! Turn off all
power sources to actuator before removing
encoder drive cartridge. Power sources may
include main power or control power.
Remove the M4 screw (#14-8) using a 3 mm hex
key.
1
14-8
STEP 2
Withdraw the complete encoder drive cartridge
from the actuator housing.
2