Flowserve MX-85 Actuator User Manual
Page 72
Advertising
Flow Control
Limitorque Actuation Systems
64
MX-85/140 Maintenance and Spare Parts
FCD LMAIM1341-00
STEP 4
Remove terminal block assembly.
4
Terminal block
assembly
STEP 5
Disconnect leads L1, L2, and L3 from back of
terminal block.
5
STEP 6
Feed the terminal block harness plugs over
the contactor assembly (in the control module
compartment) while removing the terminal block
from the terminal block compartment. Notice an
O-ring (#1-20) is included with the terminal block
assembly. Ensure you retain or replace the O-ring
at remounting.
6
1-20
Advertising
This manual is related to the following products: