Flowserve MX-85 Actuator - Manual (Page 84)

Flow Control
Limitorque Actuation Systems
76 MX-85/140 Maintenance and Spare Parts FCD LMAIM1341-00
5.8.2 Remounting
STEP 3
If actuator uses drive sleeve speed I.D. 1 or 2,
ensure input gear (#6-25) is installed on encoder
(see NOTE on page 5-28 for details). Fit the encoder
drive cartridge into the actuator housing.
3
STEP 4
Using a 3 mm hex key, fit the M4 screw (#14-8)
into the actuator housing to secure the encoder
cartridge.
4