Flowserve MX-85 Actuator - Manual (Page 24)

Flow Control
Limitorque Actuation Systems
16 MX-85/140 Maintenance and Spare Parts FCD LMAIM1341-00
STEP 5
Rotate the handwheel to lower the actuator along
the threaded stem and onto the mounting adapter
plate.
5
STEP 6
Install the mounting bolts to secure the actuator
and thrust base (#10) to the mounting adapter.
6
STEP 7
a WARNING: Hazardous Voltage! Turn off all
power sources before rewiring incoming power
leads L1, L2, L3, and control wiring in the
terminal block.
Reconnect incoming power leads L1, L2, L3, and
control wiring to the terminal block. Restore power
source when ready for operation.