Flowserve MX-85 Actuator - Manual (Page 37)

Flow Control
Limitorque Actuation Systems
FCD LMAIM1341-00 MX-85/140 Maintenance and Spare Parts 29
STEP 8
If previously removed, install handwheel worm gear
assembly (#12). (See Section 4.8.2 for remounting
procedure).
8
Handwheel
Worm Gear Adapter (12-1)
STEP 9
Insert worm shaft assembly into actuator housing.
Rotate assembly in counterclockwise (CCW) direc-
tion to properly mate with handwheel worm gear
assembly (#12).
9
STEP 10a AND b
Ensure gasket (#13-6) is placed on adapter (#13-2)
and install adapter to housing and secure with four
M8 screws (#13-9).
10a
10b