Fluke Biomedical DataSim 6100 - Manual (Page 16)

DataSim 6100
Operators Manual
1-4
General Safety Considerations
Read the Users Manual before operating the Analyzer.
Note
If calibration or other service of the Simulator is required, only
qualified service personnel should be permitted to remove the front
panel of the Simulator.
Symbols
Table 1-1 describes the symbols associated with the Analyzer.
Table 1-1. Symbols
Symbol Description
X
Hazardous voltage
W
Important information; refer to manual.
P
Conforms to European Union directives
~ Do not dispose of this product as unsorted municipal waste. Go
to Fluke’s website for recycling information.
Warnings and Cautions
A Warning identifies hazardous conditions and actions that could cause
bodily harm or death.
A Caution identifies conditions and actions that could damage the Analyzer,
the equipment under test, or cause permanent loss of data.
Levels of signals available via the output connectors and the Personality
Module connector do not exceed 12 volts, and as such, do not constitute a
potential danger to the operator. However, observe the following: