Fluke Biomedical DataSim 6100 - Manual (Page 56)

DataSim 6100
Operators Manual
2-20
Table 2-7. Appropriate Pressure Simulator Interface Cables (cont.)
Model Item Model Item
Spacelabs
(400,500,600,PC) 4100-25 Nihon/Kohden (5M)
Physiocontrol (6M) 4100-37 Honeywell/Meddars (9M)
MDE Escort (6M) 4100-40 Fukuda Denshi (8M)
Mennen (6M) 4100-42 Siemens Mingo 7 (15M)
4100-09
IVY (6M)
4100-11 EforM/Honeywell (6F) 4100-50 Armstrong High Level Output
4100-12 BD/Datamedix/Ohio
(9M)
4100-60 Marquette Eagle Series
4100-61 Fukuda Denshi (12M)
Figures 2-1 and 2-2 show the proper wiring for cables connecting channels 2
through 4 to most pressure monitors. For assistance in wiring pressure cables,
contact the Fluke Biomedical Service Center.
Note
A special interface cable is not necessary for either ECG of
respiration, because the Simulator ECG snap outputs are directly
compatible with most standard patient cable lead wires.
150 Ω 1 %
W hite
W hite
G N D Ref
+ SIG
+ EXC
- SIG
Black
Pair
fdg003.eps
Figure 2-1. Pressure Cable Wiring for Monitor with 5 µV/V mmHg
Sensitivity