GAI-Tronics L3149B C200 Advanced Deskset - Manual (Page 16)

Operation L3149B (C200) Advanced Tone Remote Desk Set
10
Setting the Clock
1. Power up the C200 Advanced Desk Set.
2. Wait for the message
CHECKING PARAMETERS PLEASE WAIT
to clear.
3. When the message
L314XA V ER . C2HXX C2DXX
appears, immediately press the
MDC
button in the
upper left hand corner of the key panel.
4. The message on the display will read
ENTER HH:MM:SS
.
5. Use the numeric keys to enter the hour, the minutes, and the seconds.
6. When complete, press the
TRANSMIT
button.
7. The message on the display will read
ENTER AM=1 PM=2
.
8. Use the numeric keys to select between AM and PM.
9. When complete, press the
TRANSMIT
button.
10. The message on the display will read
ENTER DD-MM-YY
.
11. Use the numeric keys to enter the day of the month, the month of the year, and the year.
12. When complete, press the
TRANSMIT
button.
13. The display will now show the normal mode of operation of the C200 Advanced Desk Set.
Receiving Calls
When power is applied, the desk set is in the receive mode, allowing receive audio to be heard through the
speaker or handset. The desk set is always in receive mode unless the unit is transmitting or a parallel
desk set is transmitting.
All the models contain an internal or local speaker and a handset speaker that operate as follows:
 When the handset is in the cradle, or on-hook, receive audio is heard on the local internal speaker. In
some operational modes, this can be changed.
 When the handset is off-hook, receive audio is routed to the handset. By using the front panel buttons,
you may optionally select to hear audio through the local speaker in addition to the handset.