Preset two-tone digits, A tone duration, B tone duration – GAI-Tronics L3149B C200 Advanced Deskset User Manual
Page 63: Second group timer, Talk now timer for two-tone paging, Plectron paging, Preset plectron digits
L3149B (C200) Advanced Tone Remote Desk Set
Programming
57
Preset Two-Tone Digits
This allows up to three 2-tone paging digits to be preset and controls the number of digits the operator
must enter. If two preset digits are entered, the operator is only allowed to enter the third digit. The
valid range for each digit is 0-9.
A Tone Duration
This parameter allows the duration of the first tone of the two-tone sequence to be set. The valid range is
0.5 sec
to 4.5 sec in 0.5 sec increments.
N
OTE
: This parameter affects alias paging as well.
B Tone Duration
This parameter allows duration of the second tone of the two-tone sequence to be set. The valid range is
0.5 sec
to 4.5 sec in 0.5 sec increments.
N
OTE
: This parameter affects alias paging as well.
8-second Group Timer
Enable/Disable
for the 8-second group call enable parameter. Enabling generates a single 8-second
tone frequency when a group call is made.
N
OTE
: This parameter affects alias paging as well.
TALK NOW Timer for Two-Tone Paging
Allows selection of the length of time a user is allowed to talk after the paging signal. If the
TRANSMIT
button is pressed during TALK NOW time, the unit continues to transmit until the button is released.
The range is 0 to 45 seconds. If 0 seconds is selected, the operator is not allowed to talk after the page.
Plectron Paging
Preset Plectron Digits
Allows you to preset up to four Plectron paging digits to be preset and controls the number of digits the
user must enter. If two preset digits are entered, the user is only allowed to enter the third and fourth
digits. Valid range for the capcode is 0000-3599. Please refer to the Plectron Code Plan Chart and the
Plectron Tone Group/Frequency Chart that follows for code plan specifics.
Plectron Code Plan
1st Two
(MS)
Digits
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
3rd Digit
Tone
Source
P1
P2
P1
P2
P3
P1
P3
P2
P3
P4
P1
P4
P2
P4
P3
P4
P5
P1
4th Digit
Tone
Source
P1
P2
P2
P1
P3
P3
P1
P3
P2
P4
P4
P1
P4
P2
P4
P3
P5
P5
Plectron Tone Group/Frequency Chart (in Hz)
3rd
and
4th
Digits
0 1 2 3 4 5 6 7 8 9