GAI-Tronics L3149B C200 Advanced Deskset - Manual (Page 24)

Operation L3149B (C200) Advanced Tone Remote Desk Set
18
Entering a Programmed Alias
If paging aliases have been programmed into the desk set, press either the
UP
or the
DOWN
button after
entering the paging menu. To scroll alphabetically, press the combination of either
LOCK
+
UP
or
LOCK
+
DOWN
buttons. The alias that begins with the next (or the previous) letter of the alphabet is
displayed.
Sending the Page
When the desired page appears on the display, press the
MONITOR
button to make sure the radio channel
is not in use. If programmed with an auto-channel selection, the unit selects that channel before sending
the monitor control.
When the channel is free, press
TRANSMIT
. Paging tones are generated once a channel is established and
the LCD displays:
TALK NOW (
This is provided that talk time has been enabled for this type of paging or alias.)
Mic audio is transmitted to the paged individual. When the preprogrammed talk time has elapsed, the
desk set exits the paging mode and returns to normal operation. If the 'Do not revert' option is selected,
and the auto channel selection is programmed for a paging alias, the unit remains on the same channel
until changed by the user.
If a channel cannot be established when using a CDM1550 LS Mobile Radio, “SYS NOT AVAIL” is
displayed and the page is not sent. Additional attempts can be made by pressing the
TRANSMIT
button
again.