GAI-Tronics L3149B C200 Advanced Deskset - Manual (Page 68)

Programming L3149B (C200) Advanced Tone Remote Desk Set
62
MDC Group ID
The MDC Group ID is the RapidCall group ID of the unit. This ID is not unique to a particular unit, but
to a group of units. It is used only when determining whether a specific RapidCall message is intended
for itself. The valid range is from E001 to EEEE. The ID cannot be E000 or contain a wildcard or F.
MDC Flags
PTT Enable
A PTT ID is an MDC message at the beginning of voice transmissions that identifies the source of the
transmission. This parameter enables/disables the transmission of PTT IDs. If this parameter is
Enabled
, the console will generate the PTT ID when voice or alert tone transmission occurs.
Post PTT Enable
A Post PTT ID is an MDC message set at the completion of voice transmissions that identifies the
source of the transmission. This parameter enables/disables the transmission of Post PTT IDs at the end
of voice transmissions. By default the unit is configured to transmit only a PTT ID. The unit can be
configured to send only PTT ID messages, Post PTT ID messages, or both.
Generate Sidetone during MDC
This parameter enables/disables the generation of speaker sidetone during the generation of MDC1200
data. If enabled, a tone is generated to the speaker during the generation of MDC1200 so that the
operator knows when to speak.
Automatic Select Call Enable
This parameter enables/disables automatic select call operation in the MDC1200 menu. If enabled, when
the operator selects a call type of select call, a target ID or alias may be selected. After transmitting to
the target unit, the desk set remains in the MDC1200 menu to allow successive select calls to the same
target. The operator may no longer change the target unit ID or alias. If automatic select call is disabled,
after transmitting to the target unit, the desk set exits the MDC1200 menu and returns to normal
operation.
Emergency Enable
This parameter enables/disables the decode of emergency MDC1200 messages. If enabled, the desk set
decodes and displays emergency MDC1200 messages. If disabled, the desk set ignores emergency
MDC1200 messages. See also Emergency Alarm Enable and Emergency Ack Enable.