Gasboy FuelOmat system 8 Popt Commverter - Manual (Page 111)

5.8. ADMINISTRATION TASKS PROCEDURES
The Setup and Configuration screen provides an administration screen whereby you can display the
data stored during the various setup procedures. This screen also enables you to read & write all the
setup changes and parameters to/from an EEPROM, as well as the Web ports and more as described
below.
5.8.1. EEPROM Save Procedures
To perform the administration tasks to set the EEPROM, proceed as follows (see Figure 5-9):
1. In the Main screen, press on the “Admin tasks”
Figure 5-9. Administration Tasks Screen
The available tasks are as follows:
 “Read EEPROM”
With this option you can read stored data and setup parameters from the EEPROM to RAM
memory. At this stage changes can be done and restored in EEPROM with “write to EEPROM”
option.
8 Port CommVerter Operation and Installation Manual 107