Figure 2-24. pump server settings dialog box – Gasboy FuelOmat system 8 Popt Commverter User Manual
Page 49
Advertising
Figure 2-24. Pump Server Settings Dialog Box
9. Add a cluster for use by Gilbarco Legacy & Gasboy 8800 pumps. Be sure to select the
Enable Echo checkbox when adding the cluster
10. Save any changes that were made
11. On the Setup screen, click Save and then Reload. After the reload has been successfully
completed, the Gilbarco Legacy & Gasboy 8800 pumps may be added
12. Click on the Add Pump button on the Setup screen. The Setup Pump Settings dialog box
8 Port CommVerter Operation and Installation Manual
45
Advertising