Ivoclar Vivadent EP 5010 - Manual (Page 3)

3
List of parts 4
1. Introduction / Signs and Symbols 7
1.1 Introduction
1.2 Signs and symbols used in these Operating Instructions
1.3 Notes regarding the Operating Instructions
1.4 Notes on the different voltage versions
1.5 Notes on the images in these Operating Instructions
2. Safety First 9
2.1 Indications
2.2 Health and safety instructions
3. Product Description 14
3.1 General
3.2 Hazardous areas and safety equipment
4. Installation and Initial Start-Up 15
4.1 Unpacking and checking the contents
4.2 Selecting the location
4.3 Assembly
4.4 Removing the furnace head
4.5 Initial start-up
5. Operation and Configuration 23
5.1 Introduction to the operation
5.2 Firing programs and programming options
5.3 Press programs and programming options
5.4 Advanced functions of the furnace (e.g. user code)
6. Practical Use 68
6.1 Firing procedure with an Ivoclar Vivadent program
6.2 Firing procedure with an individual program
6.3 Press procedure with an Ivoclar Vivadent program
6.4 Press procedure with an individual program
7. Maintenance, Cleaning and Diagnosis 77
7.1 Monitoring and maintenance
7.2 Cleaning
7.3 Service note
7.4 Idle mode
7.5 Power-saving mode
7.6 Replacing the press plunger
8. What if... 81
8.1 Error messages
8.2 Additional error messages
8.3 Technical malfunctions
8.4 Repair
8.5 Resetting to factory settings
9. Product Specifications 88
9.1 Delivery form
9.2 Technical data
9.3 Acceptable operating conditions
9.4 Acceptable transportation and storage conditions
10. Appendix 90
10.1 Firing program table
10.2 Press program table
Table of Contents