Ivoclar Vivadent EP 5010 - Manual (Page 69)

69
Step 4:
Load the furnace.
Now, open the furnace head using the OPEN FURNACE HEAD key
and position the firing tray with the object in the furnace.
With the Infrared Technology active, position the objects
in such a way that the infrared camera has a wide view of
the objects. Use the markings on the frame plate (see
Figure) for orientation purposes.
6. Practical Use
Step 5:
Start the program.
Activate the program by pressing the START key. The LED lights up in
green. The process is indicated in the firing curve display.
The IRT key (see Chapter 5.1.2) is used to switch to the view of the infrared camera during the closing and predrying
process. The corresponding key is pressed again to return to the firing curve display.
The furnace head opens automatically at the end of the program. When the Optical Status Display lights up in green, the
furnace is ready for the next program start.