Marantz SR7008 - Manual (Page 149)

149
Appendix Tips Settings Connections Contents
Front panel Display Rear panel Index Remote
Playback
Playback in ZONE
POWER
VOLUME df
MUTE
ZONE SELECT X
Input source
select buttons
1 Press ZONE SELECT to switch “ZONE2” or “ZONE3”.
2 Press POWER X to turn on the ZONE2 or ZONE3 power.
• Also press input source select button when in standby mode, the
power turns on.
• When POWER X is pressed, ZONE2 or ZONE3 turns off.
• Power in ZONE2 or ZONE3 can be turned on or off by pressing
ZONE2 ON/OFF or ZONE3 ON/OFF on the main unit.
3 Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2 or
ZONE3.
• To perform an operation with the main unit.
Press ZONE SELECT to select the zone to operate and then turn
INPUT SELECTOR to select an input source.