Marantz SR7008 - Manual (Page 209)

209
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
Firmware
Checks for the latest firmware information about updates and upgrades,
updates the firmware, and sets up the notification message display for
updates and upgrades.
2 Update
Update the firmware of the receiver.
Check for Update : Check for firmware updates. You can also check
approximately how long it will take to complete
an update.
Update Start : Execute the update process. When the update starts,
the menu screen is shut down. During the update, the
progress is shown on the display.
%
• If updating fails, the set automatically retries, but if updating is still not
possible, one of the messages shown below is displayed. If the display reads
as shown below, check the settings and network environment, then update
again.
Display Description
Updating fail Updating failed.
Login failed Failure to log into server.
Server is busy Server is busy. Wait a while then try again.
Connection fail Failure in connecting to server.
Download fail Downloading of the firmware has failed.
2 Notifications
When the latest firmware is available, a notification message is
displayed on the TV screen at power on.
The notification message is displayed for about 20 seconds when the
power is turned on. Connect to broadband Internet (vpage 53)
when using this function.
Update
On (Default) : Display update message.
Off : Do not display update message.
Upgrade
On (Default) : Display upgrade message.
Off : Do not display upgrade message.