Marantz SR7008 - Manual (Page 153)

153
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
2 Video
Setting items Description Page
Picture Adjust Adjusts the video quality. 172
Picture Mode Select the desired picture mode according to the video content and your viewing environment. 172
Contrast Adjust picture contrast. 172
Brightness Adjust picture brightness. 172
Saturation Adjust picture chroma level (color saturation). 172
Hue Adjust green and red balance. Also called Tint. 172
Noise Reduction Reduce overall video noise. 173
Enhancer Emphasize picture sharpness. 173
HDMI Setup Makes settings for HDMI video/audio output. 173
Auto Lip Sync Make automatic compensation for timing shift in audio and video output. 173
HDMI Audio Out Select HDMI audio output device. 174
Video Output Selects which HDMI outputs to use. 174
HDMI Pass Through Selects how the AV receiver will pass HDMI signals to the HDMI output in standby power mode. 174
HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control. 174
Pass Through Source The AV receiver will “pass through” the sources HDMI signal when in standby. 175
Power Off Control Links the power standby of this unit to external devices. 175
Setting items Description Page
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 171
Speaker Selection Select whether to adjust tones for individual speakers or for all speakers. 171
Adjust EQ Adjust tonal balance for each frequency band. Adjust the speaker selected in “Speaker Selection”. 171
Curve Copy Copy “Audyssey Flat”curve from MultEQ® XT32. 171