Marantz SR7008 - Manual (Page 234)

234
Appendix Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Tips
2 No video is shown on the TV
Symptom Cause/Solution Page
No picture appears. • Check the connections for all devices.
• Insert connection cables all the way in.
• Check that input connectors and output connectors are not reversely connected.
• Check cables for damage.
• Match the input settings to the input connector of the TV connected to this unit.
• Check that the proper input source is selected.
• Check the video input connector setting.
• Check that the resolution of the player corresponds to that of the TV.
• Check whether the TV is compatible with copyright protection (HDCP). If connected to a
device not compatible with HDCP, video will not be output correctly.
• The HDMI signal cannot be converted to an analog signal. Use analog connections.
40, 41, 42, 44,
45, 46, 47, 48,
49, 51, 53, 55,
56, 57
–
–
–
179
60, 149
179
207
244
245
No video is shown on the TV with the
DVI-D connection.
• With the DVI-D connection, on some device combinations, devices may not function properly
due to the copy guard copyright protection (HDCP).
244
No video from an input source such
as a game console is shown on the
TV.
• When special video signals are input from a game console, etc., the video conversion function
may not function. Connect the input connector to the monitor output connector of the same
type.
–
While the menu is being displayed, no
video is shown on the TV.
• When the menu is operated during playback of some 3D video contents or of video at some
computer resolutions (such as VGA), no playback video is shown in the background of the
menu.
–