2 the hdmi control function does not work – Marantz SR7008 User Manual

Page 240

Advertising
background image

240

Appendix

Settings

Playback

Connections

Contents

Front panel

Display

Rear panel

Index

Remote

Tips

2 The HDMI control function does not work

Symptom

Cause/Solution

Page

The HDMI control function does not

work.

• Check that “HDMI Control” in the menu is set to “On”.

• You cannot operate devices that are not compatible with the HDMI control function. In

addition, depending on the connected device or the settings, the HDMI control function may

not work. In this case, operate the external device directly.

• Check that the HDMI control function setting is enabled on all devices connected to this unit.

• When you make connection related changes such as connecting an additional HDMI device,

the link operation settings may be initialized. Turn off this unit and devices connected via

HDMI, and turn them on again.

• The HDMI MONITOR 2 connector is not compatible with the HDMI control function. Use the

HDMI MONITOR 1 connector to connect to the TV.

174

132

132

132

40

2 When using HDMI ZONE2, the devices does not function properly

Symptom

Cause/Solution

Page

When using MAIN ZONE, video

output is interrupted in HDMI ZONE2.

• With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN

ZONE, video may be interrupted in HDMI ZONE2.

When using HDMI ZONE2, no video

or audio is output from the TV in

ZONE2.

• Check that the power is on for ZONE2.

• Check the input source for ZONE2.

• The HDMI 7 (AUX 1) connector on the front panel does not support the HDMI ZONE2 function.

• In ZONE2, playback is only possible when the input signals are HDMI signals.

• When the TV does not support the input audio format, audio is not output. Set the audio

format to “PCM” on the playback device. Alternatively, set “ZONE2 Setup” – “HDMI Audio”

in the menu to “PCM”.

• When the TV is not compatible with the resolution of the input video, no video is output. Set

the output resolution on the playback device to a resolution that is compatible with the TV.

149

149

204

When using HDMI ZONE2, MAIN

ZONE audio is played back as PCM.

• When the same input source is selected for MAIN ZONE and ZONE2, the audio format is

limited according to the specifications of the TV in ZONE2.

Advertising