Marantz SR7008 - Manual (Page 164)

164
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
2 Center Width
Distributes the dialogue output from the center channel to left and right
channels and widens the sound image in the front.
0 – 7 (Default : 3)
%
• You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.
• The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
2 Height Gain
Control the front height channel volume.
Low : Reduce the front height channel volume.
Normal (Default) : Front height channel sound is output with standard
sound volume.
High : Increase the front height channel volume.
%
• You can set this in the “PLgz” sound mode or when using the PLgz decoder.
2 Speaker Select
Makes settings for the speakers outputting sound.
Surround Back : Sound is output from the surround back speakers.
Height : Sound is output from the front height speakers.
Wide : Sound is output from the front wide speakers.
Back/Height : Sound is output from the surround back and front height
speakers.
Back/Wide : Sound is output from the surround back and front wide
speakers.
Height/Wide : Sound is output from the front height and front wide
speakers.
%
• This can be set when “Assign Mode” (vpage 192) is set to “9.1ch(SB/FH/
FW)”, “7.1ch + ZONE2”, “7.1ch(Bi-Amp)” or “7.1ch + Front B”.
• The speakers that can be selected by the “Main Speakers” (vpage 193)
setting are changed.
• You can set this when the sound mode is “MULTI CH STEREO” or “NEO:X”.
2 Set Defaults
The “Surround Parameter” settings are returned to the default settings.