Marantz SR7008 - Manual (Page 173)

173
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
2 Noise Reduction
Reduce overall video noise.
Low / Medium / High / Off (Default)
2 Enhancer
Emphasize picture sharpness.
0 (Default) – +12
%
• “Contrast”, “Brightness”, “Saturation”, “Hue”, “Noise Reduction” and
“Enhancer” can be set when “Picture Mode” is set to “Custom”.
• “Picture Adjust” cannot be set when 4K signals are input.
HDMI Setup
Make settings for HDMI video/audio output.
NOTE
• When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes
more standby power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
2 Auto Lip Sync
Make automatic compensation for timing shift in audio and video
output.
On (Default) : Compensated.
Off : Not compensated.
2 HDMI Audio Out
Select HDMI audio output device.
AVR (Default) : Play back through speakers connected to the unit.
TV : Play back through TV connected to the unit.
%
• When the HDMI control function is activated, priority is given to the TV audio
setting (vpage 132 “HDMI control function”).
• When the power of this unit is on and “HDMI Audio Out” is set to “TV”,
audio is output as 2-channel from the HDMI OUT connector.