Marantz SR7008 - Manual (Page 35)

35
Appendix Tips Settings Playback Contents
Front panel Display Rear panel Index Remote
Connections
2 Standard Speaker Connection
The figure below shows an example of standard speaker connection.
FRONT
SUBWOOFER
SURROUND SURROUND BACK CENTER
7.1CH IN
FRONT SURROUND FRONT HEIGHT FRONT WIDE SURROUND BACK CENTER MEDIA PLAYER ZONE2 ZONE3
AUDIO OUT PRE OUT
SUBWOOFER1 SUBWOOFER2
CLASS 2 WIRING SPEAKERS IMPEDANCE : 6～8Ω
ASSIGNABLE ASSIGNABLE
ASSIGNABLE
SW1 FL FR C SR SL SBR SBL FHR FHL FWR FWL
%
• By connecting all speakers in advance, audio playback can be automatically switched between the surround back, front height and front wide speakers corresponding to the
sound mode and input signals.
• When using this connection, also set “Assign Mode” in the menu to “9.1ch(SB/FH/FW)” (vpage 192).
• When using a signal surround back speaker, connect it to the SURROUND BACK L terminal.