Marantz SR7008 - Manual (Page 175)

175
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
2 Pass Through Source
The AV receiver will “pass through” the sources HDMI signal when
in standby.
Last : Choose this option to “pass through” the last used HDMI input
video source.
CBL/SAT (Default) / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA
PLAYER / CD z : Choose this option to “pass through” the selected
input source when in standby.
z “Pass Through Source” can be set when any of the HDMI connectors is
assigned to “CD” for the input source in the “Input Assign” (vpage 179)
setting.
%
• “Pass Through Source” can be set when “HDMI Control” is set to “On” or
“HDMI Pass Through” is set to “On”.
2 Power Off Control
Links the power standby of this unit to external devices.
All (Default) : If power to a connected TV is turned off independently
of the input source, power to this unit is automatically
set to standby.
Video : With an input source being selected that is assigned either
“HDMI”, “COMP” or “VIDEO” (vpage 180), when you
turn the power of the TV off, power to this unit is automatically
set to standby.
Off : This unit does not link with power to a TV.
Output Settings
Makes settings for video output.
%
• Can be set when each input source is assigned “HDMI”, “COMP” or “VIDEO”
(vpage 180).
• “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p
Scaler” is set to anything other than “Off”.
• “Output Settings” can not be set when 4K signals are input.
2 Video Mode
Make settings for video processing.
Auto (Default) :
Process video automatically based on the HDMI
content information.
Game : Always process video for game content.
Movie : Always process video for movie content.
%
• If “Video Mode” is set to “Auto”, the mode is switched according to the
input contents.
2 Video Conversion
The input video signal is converted automatically in conjunction with
the connected TV (vpage 245 “Video conversion function”).
On (Default) : The input video signal is converted.
Off : The input video signal is not converted.