Marantz SR7008 - Manual (Page 178)

178
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
On Screen Display
Select the on-screen display user interface preferences.
2 Volume
Sets where to display the master volume level.
Bottom (Default) : Display at the bottom.
Top : Display at the top.
Off : Turn display off.
%
• When the master volume display is hard to see when superimposed text
(closed captioning) or movie subtitles are present, set to “Top”.
2 Info
Displays status of operation temporarily when the sound mode is
changed, or input source is switched.
On (Default) : Turn display on.
Off : Turn display off.
2 Now Playing
Sets the display time for the playback display when the input source is
“NETWORK”, “iPod/USB” or “HD Radio”.
Always On (Default) : Show display continuously.
Auto Off : Show display for 30 seconds after operation.
TV Format
Set the video signal format to be output for the TV you are using.
2 Format
NTSC (Default) : Select NTSC output.
PAL : Select PAL output.
%
• “Format” can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit’s STATUS and ZONE SELECT for at least 3
seconds.
“zVideo Format <NTSC>” appears on the display.
2. Use the main unit’s o p and set the video signal format.
3. Press the main unit’s ENTER to complete the setting.
NOTE
• When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.