Marantz SR7008 - Manual (Page 192)

192
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey® Setup.
• If you change the speaker settings after performing Audyssey® Setup,
it will not be possible to select Audyssey MultEQ® XT32, Audyssey
Dynamic EQ® and Audyssey Dynamic Volume® (vpage 167, 168,
169).
• “Manual Setup” can be used without changing the settings. Please set
if necessary.
Amp Assign
Select power amplifier usage method.
2 Assign Mode
Set the assignment mode.
9.1ch(SB/FH/FW) (Default) : Assigns all power amplifiers within this
unit for MAIN ZONE.
7.1ch + ZONE2 : Setting to assign the unit’s built-in power amplifier for
ZONE2 and output the audio in stereo.
5.1ch + ZONE2/3 : Setting to assign the unit’s built-in power amplifier
for ZONE2 and ZONE3 and output the audio in
stereo.
7.1ch(Bi-Amp) : Setting to assign the unit’s built-in power amplifier
for front speaker bi-amp connections and output the
audio in stereo.
5.1ch(Bi-Amp) + ZONE2 : Settings to use the front speakers via the
bi-amp connection and assign the internal
power amp for ZONE2 to output stereo
audio.
7.1ch + Front B : Setting to use the second set of front speakers for
playback. You can switch the speaker to be used as
the “Front Speaker” (vpage 198) between Front
speaker A and B.