Marantz M-CR610 - Manual (Page 101)

101
Appendix Settings Playback Connections Contents
Front panel Rear panel Index Remote
Tips
2 USB memory devices cannot be played back
Symptom Cause/Solution Page
“No Connection” is displayed. • The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory
device.
• USB memory devices of a mass storage class or those compatible with MTP are supported.
• This unit does not support a connection through a USB hub. Connect the USB memory device
directly to the USB port.
• The USB memory device must be formatted to FAT16 or FAT32.
• Not all USB memory devices are guaranteed to work. Some USB memory devices are not
recognized. When using a type of portable hard disc drive compatible with the USB connection
that requires power from an AC adapter, use the AC adapter that came with the drive.
21
–
–
–
–
Files on the USB memory device are
not displayed.
• Files of a type not supported by this unit are not displayed.
• This unit can display a file structure with up to 8 levels and up to 5000 subfolders and files in
total. Modify the folder structure of the USB memory device.
• When multiple partitions exist on the USB memory device, only files on the first partition are
displayed.
59
–
–
Files on a USB memory device cannot
be played.
• Files are created in a format that is not supported by this unit. Check the formats supported
by this unit.
• You are attempting to play a file that is copyright protected. Files that are copyright protected
cannot be played on this unit.
108
–