Sleep timer function, Checking the current time, Switching the display’s brightness – Marantz M-CR610 User Manual

Page 76

Advertising
background image

76

Appendix

Tips

Settings

Connections

Contents

Front panel

Rear panel

Index

Remote

Playback

Sleep timer function

You can have the power automatically switched to standby once a set

time has elapsed. This is convenient for listening while going to sleep.

1

Press SLEEP and display the time you want to set.

• The

OFF

indicator on the display lights.

• You can set the sleep timer in the range from 10 to 90 minutes in

steps of 10 minutes.

2 To cancel the sleep timer

Press SLEEP to set “Sleep 1 Off”.

The

OFF

indicator on the display turns off.

%

• The sleep timer is also cancelled when this unit is set to the standby mode.
• To check the time remaining until the sleep timer is activated, press SLEEP.

Checking the current time

2 Checking the current time when the power is

on

Press CLOCK.

• Press once more and the display returns to its original condition.

2 Checking the current time when the power is

set to standby

Press CLOCK.

• The current time is displayed for 30 seconds.

NOTE

• The time cannot be set when in the standby mode. Turn on the power first.

Switching the display’s brightness

1

Press DIMMER.

• The display brightness is adjusted each time DIMMER is pressed.

100% (Default) / 75% / 50% / 25% / Off

%

• If you operate the buttons when the display’s brightness is set to “Off”, the display

temporarily lights at the 25% brightness level.

Advertising
This manual is related to the following products: