Marantz M-CR610 - Manual (Page 93)

93
Appendix Settings Playback Connections Contents
Front panel Rear panel Index Remote
Tips
Tips
Simple operations in the power off state
• When a input source select buttons, 1/3, FAVORITES CALL or 5 button is pressed, the operation is performed at the same time as the unit switches
on (vpage 28, 30, 53).
• When the Network Control function is set to “On”, you can perform playback, or other operations through AirPlay, App or the web control function
(vpage 62, 67, 87).
Simple operations for iPod/USB
• When connected to the Front USB, the Input Source automatically changes and playback begins (vpage 56).
I only want to recharge my iPod
• Connect the iPod to this unit when the unit power is on. Then turn the unit power off, and the iPod will continue to charge until fully charged
(vpage 58).
• When connected to the rear USB, the iPod can be charged without the current Input Source changing (vpage 56).
Specifying the iPod track with the alarm function
• In the power off state after setting the alarm, pause the iPod playback of the track you want to use (vpage 82).
• When using alarm playback on an iPod touch or iPhone, set the iPod touch or iPhone to “Sleep” mode. If the power is switched off using the power off
operation, alarm playback cannot be used.
Specifying the desired track with the alarm function
• After registering the desired track in NAS, etc., register the track in the favorites and then specify the track in the alarm settings (vpage 82).
Change to summer time
• Select Setup – “General” – “Clock” and configure the settings (vpage 83).
Changing or resetting the network environment
• Prepare the provided Quick Setup Guide, and run Setup – “Quick Setup”. For detailed settings, run Setup – “Network” – “Settings” (vpage 88).
I want to set the optimized listening environment after changing the configuration/position of the speakers or
changing a speaker to a new one.
• Select Setup – “General” – “Speaker Configuration” – Response and configure the settings (vpage 83).