Marantz M-CR610 - Manual (Page 74)

74
Appendix Tips Settings Connections Contents
Front panel Rear panel Index Remote
Playback
2 Selecting speakers to output audio
You can set up this unit to output audio from Speakers A, Speakers B,
or both.
1 Press SPEAKER A/B.
The current setting is displayed.
2 Press SPEAKER A/B again to change the settings.
Speakers A are On : Outputs audio from Speakers A only.
Speakers B are On : Outputs audio from Speakers B only.
Both Speakers A and B are On : Outputs audio from both Speakers
A and Speakers B.
%
• When using this connection, also set “Bi-Amp” in the menu to “Disable”
( vpage 83) .
• With the output of Speaker A fixed, the audio level of Speaker B can be adjusted
within the range –6 dB to +6 dB (vpage 84 “Volume Offset”).