Settings, 2 when making wired connection – Marantz M-CR610 User Manual

Page 88

Advertising
background image

88

Appendix

Tips

Playback

Connections

Contents

Front panel

Rear panel

Index

Remote

Settings

Settings

You can make detailed settings for the network.

To change the network environment, perform “Quick Setup”. (For details

on the operations, see the separate “Quick Setup Guide”.)

• If you are using a broadband router (DHCP function), there is no need

to make the settings at “IP Address” and “Proxy”, since the DHCP

function is set to “On” in this unit’s default settings.

• Only set “Settings” when connecting to a network without a DHCP

function.

2 When making wired connection

n DHCP

Selects how to connect to the network.
On (Default) : Configure the network settings automatically from your

router.

Off : Configure the network settings manually.

n IP Address

Set the IP address within the ranges shown below.

• The Network Audio function cannot be used if other IP addresses

are set.

CLASS A: 10.0.0.1 – 10.255.255.254

CLASS B: 172.16.0.1 – 172.31.255.254

CLASS C: 192.168.0.1 – 192.168.255.254

n Subnet Mask

When connecting an xDSL modem or connector adapter directly to this

unit, input the subnet mask indicated in the documentation supplied by

your provider. Normally input 255.255.255.0.

n Gateway

When connected to a gateway (router), input its IP address.

n Primary DNS, Secondary DNS

If there is only one DNS address indicated in the documentation

supplied by your provider, input it at “Primary DNS”. If two or more

DNS are provided by your provider, enter both “Primary DNS” and

“Secondary DNS”.

n Proxy

Make this setting when connecting to the Internet via a proxy server.

Make the proxy settings only when you connect to the Internet via

a proxy server that is on your internal network or provided by your

provider, etc.
Proxy (Off) or Proxy (On) : Set the proxy server.
Proxy (Address) or Proxy (Name) : Select when inputting by address

or domain name.

Address or Name : Inputting address or domain name. Up to 38

characters can be input.

Port : Enter port number.

%

If you cannot connect to the Internet, recheck “Connecting to a home

network (LAN)” (vpage 24).

• If you do not understand about Internet connection, contact your ISP (Internet

Service Provider) or the store from which you purchased your computer.

Advertising
This manual is related to the following products: