Marantz M-CR610 - Manual (Page 104)

104
Appendix Settings Playback Connections Contents
Front panel Rear panel Index Remote
Tips
2 Music files on PC or NAS cannot be played back
Symptom Cause/Solution Page
Files stored on a computer cannot be
played.
• Files are stored in a non-compatible format. Record in a compatible format.
• You are attempting to play a file that is copyright protected. Files that are copyright protected
cannot be played on this unit.
• Set and computer are connected by USB cable. The set’s USB port cannot be used for
connection to a computer.
• Media sharing settings are not correct. Change media sharing settings so that the unit can
access the folders on your computer.
110
–
–
38
Server is not found, or it is not
possible to connect to the server.
• The computer’s or router’s firewall is activated. Check the computer’s or router’s firewall
settings.
• Computer’s power is not turned on. Turn on the power.
• Server is not running. Launch the server.
• Set’s IP address is wrong. Check the set’s IP address.
–
–
–
87
Music files on PC cannot be played
back.
• Even if PC is connected to the USB connector on this unit, music files on it cannot be played
back. Connect PC or NAS to this unit through the network.
24
Files on PC or NAS are not displayed. • Files of a type not supported by this unit are not displayed. 110
Music stored on a NAS cannot be
played.
• If you use a NAS in conformity with the DLNA standard, enable the DLNA server function in
the NAS setting.
• If you use a NAS that does not conform with the DLNA standard, play the music via a PC.
Set Windows Media Player’s media sharing function and add NAS to the selected play folder.
• If connection is restricted, set audio equipment as the connection target.
–
38
–