NavCom Sapphire Rev.J - Manual (Page 110)

Sapphire Technical Reference Manual Rev. J
110
1.56 FORCETALKERID (ASCII)
SF-3050 Sapphire SF-3040
This command forces the talker of NMEA messages to be GP or GL, regardless of the satellites
used. This command does not apply to the following messages: ALM, MLA,
PNCTGGA,
PNCTGST, PNCTDME, PNCTSET.
Command: [FORCETALKERID] off, GP, GL
Parameter Definition
OFF Talker ID not forced
GP Talker ID forced to GP
GL Talker ID forced to GL
Default: OFF
Examples: [FORCETALKERID] GP
Forces talker ID to GP
[FORCETALKERID]OFF
Talker ID not forced
1.57 Reserved
1.58 Reserved