NavCom Sapphire Rev.J - Manual (Page 126)

Sapphire Technical Reference Manual Rev. J
126
USBMODE] command in this manual.
Examples: [FSMKDIR] “my_directory”
Creates “my_directory” in the current working directory

Once USB mode is changed to Mass Storage Device mode, the onboard file
system commands cannot access the SD flash. The following message is output:
[FSMKDIR]"ACCESS DENIED: USB IS IN MASS STORAGE MODE".

When changing the USB from Mass Storage Device mode to other modes, please
allow approximately 1 minute for the SD flash to be reconfigured and the onboard
file system to be reinitialized before implementing the onboard file system
commands.