NavCom Sapphire Rev.J - Manual (Page 364)

Sapphire Technical Reference Manual Rev. J
364
[SDCARD] REMOVED
If an SD card is inserted, the following [SDCARD] message is output:
[SDCARD] INSERTED
If an SD card is write-protected, the following [SDCARD] message is output:
[SDCARD] LOCKED
If an SD card is not write-protected, the following [SDCARD] message is output:
[SDCARD] UNLOCKED
If an SD card is removed, the following [SDCARD] message is output:
[SDCARD] REMOVED
If the SD card is removed during data logging, the following [SDCARD] message is
output:
[SDCARD] REMOVED WHILE LOGGING DATA
The following apply to both the SF-3050 and the SF-3040:
If an SD card (internal SD flash for the SF-3050) is mounted successfully, the following
[SDCARD] message is output:
[SDCARD] MOUNTED
[SDCARD] {FAT12, FAT16, FAT32}; nnnnnn TOTAL BYTES; nnnnnn FREE BYTES
If an SD card (internal SD flash for the SF-3050) mounting fails, the following [SDCARD]
message is output:
[SDCARD] MOUNTING FAILED
The following [SDCARD] message indicates mounting of the SD card (internal SD flash
for the SF-3050) is in progress:
[SDCARD] MOUNTING... 5
[SDCARD] MOUNTING... 6
[SDCARD] MOUNTING... 7
[SDCARD] MOUNTING... 8

The numeral indicates the mounting time in seconds.

Refer to the [LOGFILE] command for further information about the SD card or
internal SD flash.