Msgstandard, Reserved – NavCom Sapphire Rev.J User Manual
Page 164
Sapphire Technical Reference Manual Rev. J
164
1.113
MSGSTANDARD
SF-3050
Sapphire
SF-3040
This command is used to configure the format of the NMEA output messages to a specific
standard and version.
Command:
[MSGSTANDARD] <standardtype>, <version>
Parameter
Definition
Standardtype
IEC61162 - Standard type for the NMEA messages. Requires a version number.
DEFAULT - Configures the NMEA messages to correspond to the default setting,
which is currently IEC61162, Version 4
Version
3
– Sets the following messages to NMEA 0183 version 3.0: GRS, GSA, GSV, RMC
and VTG
4
– Sets all NMEA 0183 messages to version 4.10 (default setting)
Default: DEFAULT
Examples:
[MSGSTANDARD] IEC61162, 4
Configures the NMEA messages to correspond to IEC61162, Version 4
[MSGSTANDARD] IEC61162, 3
Configures the NMEA messages to correspond to IEC61162, Version 3
[MSGSTANDARD] DEFAULT
Configures the NMEA messages to correspond to the default setting, which is
currently IEC61162, Version 4
1.114
Reserved