NavCom Sapphire Rev.J - Manual (Page 204)

Sapphire Technical Reference Manual Rev. J
204
1.151 RTKFLOATTIMEOUT (ASCII)
SF-3050 Sapphire SF-3040
This command is used to set the timeout in seconds for RTK Float.
Command: [RTKFLOATTIMEOUT] timeout
Parameter Definition
timeout RTK float limit (positive integer) (0 to 2147483647)
Default: 300 seconds
Example: [RTKFLOATTIMEOUT] 600
Sets correction age limit to 600 seconds
1.152 Reserved