NavCom Sapphire Rev.J - Manual (Page 138)

Sapphire Technical Reference Manual Rev. J
138
Keyword ASCII String Description
FILE IS CLOSED PROPERLY This message is output when file logging is stopped
by issuing [LOGFILE]A:,STOP command, or a
graceful shutown of the receiver
Once this message is output, SD flash/card state is
changed to “SD FLASH IS GOOD” for Solaris and
“SD CARD IS GOOD” for the SF-3040
STARTING RETRIEVING FREE SPACE … n This message shows the receiver is retrieving free
space on SD flash/card
“n” means time passes in seconds since retrieving
free space has been started.
This message is output when [LOGFILE]A:,START is
issued, and SD flash/card is good for logging data
OPENING LOGGING
DIRECTORY This message shows the receiver is opening the
logging directory
The message is output when retrieving free space is
finished and free space on SD flash/card is greater
than 1Mbytes
CREATING LOGGING FILE This message shows the reciver is creating the
logging file
The message is output after a successful opening of
the logging directory
READY TO LOG DATA This message shows the receiver is ready to log data
The message is output after a successful creation of
the logging file
SD FLASH IS BEING MOUNTED,
PLEASE WAIT (SF-3050)
SD CARD IS BEING MOUNTED,
PLEASE WAIT (SF-3040)
This message is output when [LOGFILE]A:,START is
issued, and mounting of SD flash/card is not finished
yet
Upon completion of a successful SD flash/card
mounting, file logging will proceed
SD FLASH IS BEING
FORMATTED, PLEASE WAIT
(SF-3050)
SD CARD IS BEING
FORMATTED, PLEASE WAIT
(SF-3040)
This message is output when [LOGFILE]A:,START is
issued, and formatting of SD flash/card is not finished
yet
Upon completion of a successful SD flash/card
formatting, file logging will proceed
RUNNING nnn BYTES LOGGED This message shows the receiver is logging data on
SD flash/card, and how many bytes of data have
been logged so far
This message is output when [LOGFILE] is issued,
and the receiver is logging data on SD flash/card
PAUSED nnn BYTES LOGGED This message shows file logging is paused, and how
many bytes of data have been logged so far