NavCom Sapphire Rev.J - Manual (Page 232)

Sapphire Technical Reference Manual Rev. J
232
1.197 TRACKELEVMASK (ASCII)
SF-3050 Sapphire SF-3040
This command is used to manually set the tracking elevation mask angle. Satellites below this
mask angle will not be tracked or used by the receiver, based on available Almanac data.
Command: [TRACKELEVMASK] degree
Parameter Definition
Degree tracking elevation mask (float, degrees) (0.0 to 60.0)
Default: 0.0 degrees
Example: [TRACKELEVMASK] 5
Sets the tracking elevation mask angle to 5.0 degrees