NavCom SF-3050 Rev.A - Manual (Page 124)

SF-3050 User Guide – Rev A
A-122
because of the close correlation in pha
measurement corrections between RTK and
StarFire. se
n
to:
s for a NCT base station
• 2 to 10 minutes for a non-NCT base station
K and StarFire
phase measurement corrections decreases
over time, until the system automatically
transitions o
E
next available dGPS mo
Pull-In Times
User programmable output r
0 Bundles
Depending on how long the RTK base statio
has been running and is StarFire fixed, the
duration of RTK Extend is limited
• 2 to 15 minute
The correlation between RT
ut of RTK xtend mode to the
de.
ates
SF-305
Rate
G S M
Position, Velocity, and Time
1, 5*Hz Std Std Std
10Hz Opt Opt Std
25*Hz Opt Opt Std
50, 100Hz Opt Opt Opt
Raw Data
1, 5*Hz Std Std Std
10Hz Opt Opt Std
25*Hz Opt Opt Std
50, 100Hz Opt Opt Opt

*5Hz is the default PVT and Raw Data Rate for
StarFire Single: Immediate
StarFire Dual: 45 minutes, typical