NavCom SF-3050 Rev.A - Manual (Page 88)

SF-3050 User Guide – Rev A
3-86
5. C col
6. Select the option, Use the following IP address
(see Figure 52).
lick the Properties button. The Internet Proto
window opens.
Figure 52: Internet Protocol Window
7. Ente e, enter

The first par
r the IP address for the PC. In this cas
192.168.0.100
t of the IP address, 192.168.0,
is the same for both the SF-3050 and the
PC. The last part of the IP address must
be unique for every device. In this case, it
is 100 for the PC.
ss the Tab button on the keyboard. The
k is aut
8. Pre Subnet
mas omatically populated.
9. Click the OK button in this window and also in the
Local Area Connection window.
10. Continue to the next section for connection
instructions.