NavCom SF-3050 Rev.A - Manual (Page 125)

SF-3050 User Guide – Rev A
A-123
software bundles G and S. 25Hz is the default
PVT and Raw Data Rate for bundle M.
ata Latency and Memory
1PPS
Connector Assignments
lt, the two f ic ports are
for comma ata
/output. Refer to Chapter 3 Interfacing for
VT: < 10 ms
D
1
Not available for v1.0 software.

By defau
available
input emale Positron
nd inputs and d
I/O connector pin assignments.
P
Raw Data: < 10 ms
Internal Memory
1
2 GB
Accuracy: +13 ns (Relative; User Configurable)
AN TNC (femal
RF Input, R T: e)
F Ground
COM 1 – LAN: Positronic (female)
RS-232, fro
ps
1PPS
m 9.6 to 115.2kb
Ethernet, from 10 to 100Mbps
COM 2 – USB: Positronic (fe
RS-232/RS-
15.2kbps
USB 2.0, 12M
male)
422, from 9.6 to 1
bps max data rate
POWER: Positronic (male)
Power port, from 9 to 32 VDC, 6W typical,
Power Input
r Ground
1PPS / Event Marker
1,2; Powe
Blu 1 Serial Port 230.4kbps
10m (32 ft) r
etooth: Service,
ange