NavCom LAND-PAK Rev.F - Manual (Page 125)

LAND-PAK™ User Guide – Rev. F
B-126
Over-tightening the knob may cause
damage to the tripod leg finish.
2. Level the bracket by eye. Loosen the knob on the
side of the bracket to make any necessary
adjustments. This ensures that the radio antenna
pole will be vertical when mounted.
Figure 82: Mounting the Antenna and Cable
Refer to Figure 82 for the steps below:
3. Screw the antenna adapter to the top of the radio
antenna pole.
4. Screw the radio modem antenna to the antenna
adapter on the top of the radio antenna pole.
5. Connect the straight male TNC connector end of
the radio antenna cable to the bottom of the
antenna adapter.
6. Extend the radio antenna pole to the maximum
height possible.
Extending the radio antenna pole
increases the radio modem range,
isolates the receiver signals from the