NavCom LAND-PAK Rev.F User Manual
Page 63
Advertising
LAND-PAK™ User Guide – Rev. F
4-62
Figure 19: Base Station Tripod – Leg Adjustments
Figure 20: Base Station Tripod
Refer to Figure 20 for the steps below:
4. Remove the tripod cap by unscrewing the tribrach
fastener.
Use the two Allen wrenches (4mm and/or 5mm,
respectively) on the top plate of the tripod to
tighten the hex screws at the top of the tripod if
needed.
Advertising