NavCom LAND-PAK Rev.F - Manual (Page 51)

LAND-PAK™ User Guide – Rev. F
3-49
Refer to the supplied SF-3040 GNSS
Receiver Product User Guide for
complete details on battery charging,
installation, use, safety, and disposal.
The SF-3040 GNSS receiver battery packs are keyed
to prevent improper installation. There are two locking
clips on either side of the battery bay.
Figure 13: Battery Packs Installed in Chamber
Showing Locking Clips
Ensure that both locking clips are
locked in place. If both locking clips
are not locked in place, the battery
packs can disengage.
Battery Removal
With your thumb, push a locking clip to the side (refer
to Figure 13). The battery pack should pop out
enough to be pulled free of the chamber. Repeat for
the second battery pack.
Nautiz X8 Battery Pack
This section provides steps to charge the battery
pack for the Nautiz X8.
Locking
Clip Locking
Clip